dmesg - AMD Opteron 6376
Linux version 4.20.3-arch1-1-ARCH (builduser@heftig-25602) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Wed Jan 16 22:38:58 UTC 2019
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
random: get_random_u32 called from bsp_init_amd+0x1f9/0x290 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dff7ffff] usable
BIOS-e820: [mem 0x00000000dff8e000-0x00000000dff8ffff] type 9
BIOS-e820: [mem 0x00000000dff90000-0x00000000dffa1fff] ACPI data
BIOS-e820: [mem 0x00000000dffa2000-0x00000000dffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000dffe0000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: ASUSTeK Computer INC. KGP(M)E-D16/KGP(M)E-D16, BIOS 3309 06/16/2016
tsc: Fast TSC calibration using PIT
tsc: Detected 2299.999 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000041f000000 aka 16880M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdff80 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(____ptrval____)]
check: Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 95000 size 24576
Using GB pages for direct mapping
BRK [0x29ea01000, 0x29ea01fff] PGTABLE
BRK [0x29ea02000, 0x29ea02fff] PGTABLE
BRK [0x29ea03000, 0x29ea03fff] PGTABLE
BRK [0x29ea04000, 0x29ea04fff] PGTABLE
BRK [0x29ea05000, 0x29ea05fff] PGTABLE
BRK [0x29ea06000, 0x29ea06fff] PGTABLE
BRK [0x29ea07000, 0x29ea07fff] PGTABLE
RAMDISK: [mem 0x3694b000-0x3749cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FACC0 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000DFF90100 000094 (v01 061616 XSDT1422 20160616 MSFT 00000097)
ACPI: FACP 0x00000000DFF90290 0000F4 (v03 061616 FACP1422 20160616 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181003/tbfadt-624)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20181003/tbfadt-569)
ACPI: DSDT 0x00000000DFF90580 0060CB (v01 S0100 S0100000 00000000 INTL 20060113)
ACPI: FACS 0x00000000DFFA2000 000040
ACPI: FACS 0x00000000DFFA2000 000040
ACPI: APIC 0x00000000DFF90390 00015E (v01 061616 APIC1422 20160616 MSFT 00000097)
ACPI: MCFG 0x00000000DFF904F0 00003C (v01 061616 OEMMCFG 20160616 MSFT 00000097)
ACPI: SPMI 0x00000000DFF90530 000041 (v05 061616 OEMSPMI 20160616 MSFT 00000097)
ACPI: OEMB 0x00000000DFFA2040 00007B (v01 061616 OEMB1422 20160616 MSFT 00000097)
ACPI: HPET 0x00000000DFF9A580 000038 (v01 061616 OEMHPET 20160616 MSFT 00000097)
ACPI: IVRS 0x00000000DFF9A5C0 0000B0 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: SRAT 0x00000000DFF9A670 0002D0 (v02 AMD AGESA 00000001 AMD 00000001)
ACPI: SLIT 0x00000000DFF9A940 00003C (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DFF9A980 005984 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: EINJ 0x00000000DFFA0310 000130 (v01 AMIER AMI_EINJ 20160616 MSFT 00000097)
ACPI: BERT 0x00000000DFFA04A0 000030 (v01 AMIER AMI_BERT 20160616 MSFT 00000097)
ACPI: ERST 0x00000000DFFA04D0 0001B0 (v01 AMIER AMI_ERST 20160616 MSFT 00000097)
ACPI: HEST 0x00000000DFFA0680 0000A8 (v01 AMIER ABC_HEST 20160616 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x20 -> Node 0
SRAT: PXM 0 -> APIC 0x21 -> Node 0
SRAT: PXM 0 -> APIC 0x22 -> Node 0
SRAT: PXM 0 -> APIC 0x23 -> Node 0
SRAT: PXM 0 -> APIC 0x24 -> Node 0
SRAT: PXM 0 -> APIC 0x25 -> Node 0
SRAT: PXM 0 -> APIC 0x26 -> Node 0
SRAT: PXM 0 -> APIC 0x27 -> Node 0
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x2b -> Node 1
SRAT: PXM 1 -> APIC 0x2c -> Node 1
SRAT: PXM 1 -> APIC 0x2d -> Node 1
SRAT: PXM 1 -> APIC 0x2e -> Node 1
SRAT: PXM 1 -> APIC 0x2f -> Node 1
SRAT: PXM 2 -> APIC 0x40 -> Node 2
SRAT: PXM 2 -> APIC 0x41 -> Node 2
SRAT: PXM 2 -> APIC 0x42 -> Node 2
SRAT: PXM 2 -> APIC 0x43 -> Node 2
SRAT: PXM 2 -> APIC 0x44 -> Node 2
SRAT: PXM 2 -> APIC 0x45 -> Node 2
SRAT: PXM 2 -> APIC 0x46 -> Node 2
SRAT: PXM 2 -> APIC 0x47 -> Node 2
SRAT: PXM 3 -> APIC 0x48 -> Node 3
SRAT: PXM 3 -> APIC 0x49 -> Node 3
SRAT: PXM 3 -> APIC 0x4a -> Node 3
SRAT: PXM 3 -> APIC 0x4b -> Node 3
SRAT: PXM 3 -> APIC 0x4c -> Node 3
SRAT: PXM 3 -> APIC 0x4d -> Node 3
SRAT: PXM 3 -> APIC 0x4e -> Node 3
SRAT: PXM 3 -> APIC 0x4f -> Node 3
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x21fffffff]
ACPI: SRAT: Node 2 PXM 2 [mem 0x220000000-0x41effffff]
NUMA: Initialized distance table, cnt=4
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xdfffffff] -> [mem 0x00000000-0xdfffffff]
NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x21fffffff] -> [mem 0x00000000-0x21fffffff]
NODE_DATA(0) allocated [mem 0x21fffc000-0x21fffffff]
NODE_DATA(2) allocated [mem 0x41effb000-0x41effefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009afff]
node 0: [mem 0x0000000000100000-0x00000000dff7ffff]
node 0: [mem 0x0000000100000000-0x000000021fffffff]
node 2: [mem 0x0000000220000000-0x000000041effffff]
Zeroed struct page in unavailable ranges: 230 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
On node 0 totalpages: 2096922
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3994 pages, LIFO batch:0
DMA32 zone: 14270 pages used for memmap
DMA32 zone: 913280 pages, LIFO batch:63
Normal zone: 18432 pages used for memmap
Normal zone: 1179648 pages, LIFO batch:63
Initmem setup node 2 [mem 0x0000000220000000-0x000000041effffff]
On node 2 totalpages: 2093056
Normal zone: 32704 pages used for memmap
Normal zone: 2093056 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 80, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 81, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 32 CPUs, 0 hotplug CPUs
NODE_DATA(1) allocated [mem 0x41eff3000-0x41eff6fff]
NODE_DATA(1) on node 2
Initmem setup node 1 [mem 0x0000000000000000-0x0000000000000000]
On node 1 totalpages: 0
NODE_DATA(3) allocated [mem 0x41efef000-0x41eff2fff]
NODE_DATA(3) on node 2
Initmem setup node 3 [mem 0x0000000000000000-0x0000000000000000]
On node 3 totalpages: 0
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]
PM: Registered nosave memory: [mem 0xdff80000-0xdff8dfff]
PM: Registered nosave memory: [mem 0xdff8e000-0xdff8ffff]
PM: Registered nosave memory: [mem 0xdff90000-0xdffa1fff]
PM: Registered nosave memory: [mem 0xdffa2000-0xdffdffff]
PM: Registered nosave memory: [mem 0xdffe0000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[mem 0xf0000000-0xffdfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:4
percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [1] 08 09 10 11 12 13 14 15
pcpu-alloc: [2] 16 17 18 19 20 21 22 23 [3] 24 25 26 27 28 29 30 31
Built 4 zonelists, mobility grouping on. Total pages: 4124487
Policy zone: Normal
printk: log_buf_len individual max cpu contribution: 4096 bytes
printk: log_buf_len total cpu_extra contributions: 126976 bytes
printk: log_buf_len min size: 131072 bytes
printk: log_buf_len: 262144 bytes
printk: early log buf free: 117668(89%)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
Memory: 16319708K/16759912K available (12293K kernel code, 1268K rwdata, 3688K rodata, 1536K init, 3936K bss, 440204K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=4
ftrace: allocating 35803 entries in 140 pages
rcu: Preemptible hierarchical RCU implementation.
rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
rcu: RCU dyntick-idle grace-period acceleration is enabled.
rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32.
rcu: RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16
rcu: Offload RCU callbacks from CPUs: (none).
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
printk: console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
ACPI: Core revision 20181003
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2127345424d, max_idle_ns: 440795318347 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4601.66 BogoMIPS (lpj=7666663)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 28K
smpboot: CPU0: AMD Opteron(tm) Processor 6376 (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
.... node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15
.... node #2, CPUs: #16 #17 #18 #19 #20 #21 #22 #23
.... node #3, CPUs: #24 #25 #26 #27 #28 #29 #30 #31
smp: Brought up 4 nodes, 32 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 32 processors activated (147258.72 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdffa2000-0xdffdffff] (253952 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 8192 (order: 7, 524288 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:53:40, date: 02/12/19
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1549994020.439:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a10] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: enabling Extended Tags
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: enabling Extended Tags
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xb000-0xb007]
pci 0000:00:11.0: reg 0x14: [io 0xa000-0xa003]
pci 0000:00:11.0: reg 0x18: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 0x1c: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 0x20: [io 0x7000-0x700f]
pci 0000:00:11.0: reg 0x24: [mem 0xfaffe400-0xfaffe7ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfaff6000-0xfaff6fff]
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfaff7000-0xfaff7fff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfaffe800-0xfaffe8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfaffc000-0xfaffcfff]
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfaffd000-0xfaffdfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfaffec00-0xfaffecff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfafff000-0xfaffffff]
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:00:19.0: [1022:1600] type 00 class 0x060000
pci 0000:00:19.1: [1022:1601] type 00 class 0x060000
pci 0000:00:19.2: [1022:1602] type 00 class 0x060000
pci 0000:00:19.3: [1022:1603] type 00 class 0x060000
pci 0000:00:19.4: [1022:1604] type 00 class 0x060000
pci 0000:00:19.5: [1022:1605] type 00 class 0x060000
pci 0000:00:1a.0: [1022:1600] type 00 class 0x060000
pci 0000:00:1a.1: [1022:1601] type 00 class 0x060000
pci 0000:00:1a.2: [1022:1602] type 00 class 0x060000
pci 0000:00:1a.3: [1022:1603] type 00 class 0x060000
pci 0000:00:1a.4: [1022:1604] type 00 class 0x060000
pci 0000:00:1a.5: [1022:1605] type 00 class 0x060000
pci 0000:00:1b.0: [1022:1600] type 00 class 0x060000
pci 0000:00:1b.1: [1022:1601] type 00 class 0x060000
pci 0000:00:1b.2: [1022:1602] type 00 class 0x060000
pci 0000:00:1b.3: [1022:1603] type 00 class 0x060000
pci 0000:00:1b.4: [1022:1604] type 00 class 0x060000
pci 0000:00:1b.5: [1022:1605] type 00 class 0x060000
pci 0000:03:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfbfe0000-0xfbffffff]
pci 0000:03:00.0: reg 0x18: [io 0xec00-0xec1f]
pci 0000:03:00.0: reg 0x1c: [mem 0xfbfdc000-0xfbfdffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfbee0000-0xfbefffff]
pci 0000:02:00.0: reg 0x18: [io 0xdc00-0xdc1f]
pci 0000:02:00.0: reg 0x1c: [mem 0xfbedc000-0xfbedffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: extended config space not accessible
pci 0000:01:01.0: [1a03:2000] type 00 class 0x030000
pci 0000:01:01.0: reg 0x10: [mem 0xfb000000-0xfb7fffff]
pci 0000:01:01.0: reg 0x14: [mem 0xfbdc0000-0xfbddffff]
pci 0000:01:01.0: reg 0x18: [io 0xcc00-0xcc7f]
pci 0000:01:01.0: supports D1 D2
pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:02.0: [11c1:5811] type 00 class 0x0c0010
pci 0000:01:02.0: reg 0x10: [mem 0xfbdff000-0xfbdfffff]
pci 0000:01:02.0: supports D1 D2
pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfb000000-0xfbdfffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
pci 0000:01:01.0: vgaarb: setting as boot VGA device
pci 0000:01:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:01.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdff80000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [mem 0xf6000000-0xf6003fff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0550-0x0551] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [io 0xfe00-0xfefe] has been reserved
system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:14.4: PCI bridge to [bus 01]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfb000000-0xfbdfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfbdfffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6ad took 646588 usecs
pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x6ad took 32510 usecs
pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6ad took 32364 usecs
pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6ad took 32537 usecs
pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6ad took 32349 usecs
pci 0000:01:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 11592K
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:09.0 to group 1
iommu: Adding device 0000:00:0a.0 to group 2
iommu: Adding device 0000:00:11.0 to group 3
iommu: Adding device 0000:00:12.0 to group 4
iommu: Adding device 0000:00:12.1 to group 4
iommu: Adding device 0000:00:12.2 to group 4
iommu: Adding device 0000:00:13.0 to group 5
iommu: Adding device 0000:00:13.1 to group 5
iommu: Adding device 0000:00:13.2 to group 5
iommu: Adding device 0000:00:14.0 to group 6
iommu: Adding device 0000:00:14.1 to group 7
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:14.4 to group 9
iommu: Adding device 0000:00:14.5 to group 10
iommu: Adding device 0000:03:00.0 to group 11
iommu: Adding device 0000:02:00.0 to group 12
iommu: Adding device 0000:01:01.0 to group 9
iommu: Adding device 0000:01:02.0 to group 9
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:09.0: Signaling PME with IRQ 27
pcieport 0000:00:0a.0: Signaling PME with IRQ 29
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfb000000, mapped to 0x(____ptrval____), using 1216k, total 1216k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Failed to get Error Log Address Range.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
usbcore: registered new interface driver usbserial_generic
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: CPU6: patch_level=0x06000822
microcode: CPU7: patch_level=0x06000822
microcode: CPU8: patch_level=0x06000822
microcode: CPU9: patch_level=0x06000822
microcode: CPU10: patch_level=0x06000822
microcode: CPU11: patch_level=0x06000822
microcode: CPU12: patch_level=0x06000822
microcode: CPU13: patch_level=0x06000822
microcode: CPU14: patch_level=0x06000822
microcode: CPU15: patch_level=0x06000822
microcode: CPU16: patch_level=0x06000822
microcode: CPU17: patch_level=0x06000822
microcode: CPU18: patch_level=0x06000822
microcode: CPU19: patch_level=0x06000822
microcode: CPU20: patch_level=0x06000822
microcode: CPU21: patch_level=0x06000822
microcode: CPU22: patch_level=0x06000822
microcode: CPU23: patch_level=0x06000822
microcode: CPU24: patch_level=0x06000822
microcode: CPU25: patch_level=0x06000822
microcode: CPU26: patch_level=0x06000822
microcode: CPU27: patch_level=0x06000822
microcode: CPU28: patch_level=0x06000822
microcode: CPU29: patch_level=0x06000822
microcode: CPU30: patch_level=0x06000822
microcode: CPU31: patch_level=0x06000822
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (3212403294, 33854038)->(3444079227, -197821895)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: df2966addbd7cbc7c222072b1e397c0434a3bb1d'
zswap: loaded using pool lzo/zbud
Key type big_key registered
APEI: Can not request [mem 0xdffa0440-0xdffa0493] for APEI BERT registers
Magic number: 7:20:896
rtc_cmos 00:02: setting system clock to 2019-02-12 17:53:42 UTC (1549994022)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 1536K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image memory: 2016K
Freeing unused kernel image memory: 408K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
fbcon: Taking over console
Console: switching to colour frame buffer device 80x30
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci-pci: EHCI PCI platform driver
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfaffe800
e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
SCSI subsystem initialized
cryptd: max_cpu_qlen set to 1000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.20.3-arch1-1-ARCH ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
libata version 3.00 loaded.
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfaffec00
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
scsi host0: pata_atiixp
scsi host1: pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata3: SATA max UDMA/133 abar m1024@0xfaffe400 port 0xfaffe500 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfaffe400 port 0xfaffe580 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfaffe400 port 0xfaffe600 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfaffe400 port 0xfaffe680 irq 22
ata7: SATA max UDMA/133 abar m1024@0xfaffe400 port 0xfaffe700 irq 22
ata8: SATA max UDMA/133 abar m1024@0xfaffe400 port 0xfaffe780 irq 22
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.20.3-arch1-1-ARCH ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfaff6000
e1000e 0000:03:00.0 0000:03:00.0 (uninitialized): registered PHC clock
firewire_ohci 0000:01:02.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.20.3-arch1-1-ARCH ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfaff7000
e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:c3:7b:46:5b:dd
e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.20.3-arch1-1-ARCH ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfaffc000
e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock
e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 10:c3:7b:46:5b:dc
e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.20.3-arch1-1-ARCH ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfaffd000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.20.3-arch1-1-ARCH ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfafff000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.20.3-arch1-1-ARCH ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: supports DRM functions and may not be fully accessible
ata8.00: NCQ Send/Recv Log not supported
ata8.00: ATA-9: SAMSUNG MZ7TD256HAFV-000L7, DXT06L6Q, max UDMA/133
ata8.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata8.00: supports DRM functions and may not be fully accessible
ata8.00: NCQ Send/Recv Log not supported
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA SAMSUNG MZ7TD256 6L6Q PQ: 0 ANSI: 5
sd 7:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 7:0:0:0: [sda] Write Protect is off
sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 7:0:0:0: [sda] supports TCG Opal
sd 7:0:0:0: [sda] Attached SCSI disk
firewire_core 0000:01:02.0: created device fw0: GUID 001e8c0000724ab9, S400
tsc: Refined TSC clocksource calibration: 2299.991 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21272cd0abe, max_idle_ns: 440795287762 ns
clocksource: Switched to clocksource tsc
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:02:00.0 eth1: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
random: dropbear: uninitialized urandom read (32 bytes read)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
e1000e: eth1 NIC Link is Down
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:02:00.0 eth1: 10/100 speed: disabling TSO
e1000e: eth1 NIC Link is Down
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:02:00.0 eth1: 10/100 speed: disabling TSO
e1000e: eth1 NIC Link is Down
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:02:00.0 eth1: 10/100 speed: disabling TSO
e1000e: eth1 NIC Link is Down
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:02:00.0 eth1: 10/100 speed: disabling TSO
random: dropbear: uninitialized urandom read (32 bytes read)
random: dropbear: uninitialized urandom read (32 bytes read)
NET: Registered protocol family 38
random: cryptsetup: uninitialized urandom read (2 bytes read)
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
e1000e: eth1 NIC Link is Down
random: fast init done
systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /usr/lib/systemd/system/auditd.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/auditd.pid \xe2\x86\x92 /run/auditd.pid; please update the unit file accordingly.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: /usr/lib/systemd/system/netdata.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/netdata/netdata.pid \xe2\x86\x92 /run/netdata/netdata.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/gssproxy.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/gssproxy.pid \xe2\x86\x92 /run/gssproxy.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/rpc-statd.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid \xe2\x86\x92 /run/rpc.statd.pid; please update the unit file accordingly.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Reached target Remote File Systems.
EXT4-fs (dm-0): re-mounted. Opts: data=ordered
audit: type=1130 audit(1549994191.005:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549994191.009:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[695]: Received request to flush runtime journal from PID 1
audit: type=1130 audit(1549994191.275:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549994191.319:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549994191.372:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
acpi_cpufreq: overriding BIOS provided _PSD data
audit: type=1130 audit(1549994191.465:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb20, revision 0
input: PC Speaker as /devices/platform/pcspkr/input/input2
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb00
IPMI message handler: version 39.2
e1000e 0000:02:00.0 enp2s0: renamed from eth1
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
e1000e 0000:03:00.0 enp3s0: renamed from eth0
ipmi device interface
ipmi_si: IPMI System Interface driver
ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
ipmi_platform: ipmi_si: SMBIOS: mem 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at mem address 0xca2, slave address 0x0, irq 0
ipmi_si dmi-ipmi-si.0: Could not set up I/O space
Linux agpgart interface v0.103
audit: type=1130 audit(1549994191.625:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC enabled.
EDAC amd64: F15h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 1
EDAC MC0: Giving out device to module amd64_edac controller F15h: DEV 0000:00:18.3 (INTERRUPT)
EDAC amd64: Node 1: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 2: DRAM ECC enabled.
EDAC amd64: F15h detected (node 2).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 4096MB 3: 4096MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 1
EDAC MC2: Giving out device to module amd64_edac controller F15h: DEV 0000:00:1a.3 (INTERRUPT)
EDAC amd64: Node 3: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
AMD64 EDAC driver v3.5.0
checking generic (fb000000 130000) vs hw (fb000000 800000)
fb0: switching to astdrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Using P2A bridge for configuration
[drm] AST 1100 detected
[drm] Analog VGA only
[drm] dram MCLK=200 Mhz type=0 bus_width=16 size=00800000
[TTM] Zone kernel: Available graphics memory: 8201624 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: astdrmfb (fb0) is primary device
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
Console: switching to colour frame buffer device 128x48
audit: type=1130 audit(1549994191.865:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
microcode: CPU29: new patch_level=0x06000852
microcode: CPU6: new patch_level=0x06000852
microcode: CPU3: new patch_level=0x06000852
microcode: CPU9: new patch_level=0x06000852
microcode: CPU1: new patch_level=0x06000852
microcode: CPU5: new patch_level=0x06000852
microcode: CPU24: new patch_level=0x06000852
microcode: CPU20: new patch_level=0x06000852
microcode: CPU27: new patch_level=0x06000852
microcode: CPU15: new patch_level=0x06000852
microcode: CPU10: new patch_level=0x06000852
microcode: CPU13: new patch_level=0x06000852
microcode: CPU30: new patch_level=0x06000852
microcode: CPU18: new patch_level=0x06000852
microcode: CPU23: new patch_level=0x06000852
microcode: CPU17: new patch_level=0x06000852
x86/CPU: CPU features have changed after loading microcode, but might not take effect.
x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.
audit: type=1130 audit(1549994192.079:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
ast 0000:01:01.0: fb0: astdrmfb frame buffer device
[drm] Initialized ast 0.1.0 20120228 for 0000:01:01.0 on minor 0
w83627ehf: Found W83667HG-B chip at 0x290
w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
8021q: 802.1Q VLAN Support v1.8
i2c i2c-1: Found w83795g rev. B at 0x2f
w83795 1-002f: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
8021q: adding VLAN 0 to HW filter on device enp2s0
e1000e: enp2s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
kauditd_printk_skb: 8 callbacks suppressed
audit: type=1130 audit(1549994198.609:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpcd@enp2s0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549994198.615:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=libvirtd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549994198.619:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549994198.629:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549994198.632:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1549994198.892:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=netdata comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
random: crng init done
random: 4 urandom warning(s) missed due to ratelimiting
audit: type=1325 audit(1549994248.712:26): table=filter family=2 entries=0
audit: type=1300 audit(1549994248.712:26): arch=c000003e syscall=175 success=yes exit=0 a0=562509c30770 a1=22e1 a2=5625088bdde6 a3=562509c2c010 items=0 ppid=513 pid=1286 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
audit: type=1327 audit(1549994248.712:26): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
audit: type=1325 audit(1549994248.742:27): table=filter family=10 entries=0
audit: type=1300 audit(1549994248.742:27): arch=c000003e syscall=175 success=yes exit=0 a0=5558c2a66770 a1=22f1 a2=5558c0af1de6 a3=5558c2a62010 items=0 ppid=513 pid=1290 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
audit: type=1327 audit(1549994248.742:27): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D006970367461626C655F66696C746572
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered disabled state
device virbr1-nic entered promiscuous mode
audit: type=1700 audit(1549994249.119:28): dev=virbr1-nic prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
audit: type=1300 audit(1549994249.119:28): arch=c000003e syscall=16 success=yes exit=0 a0=16 a1=89a2 a2=7ff1d4f51880 a3=7ff1f35c2748 items=0 ppid=1 pid=917 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="libvirtd" exe="/usr/bin/libvirtd" key=(null)
audit: type=1327 audit(1549994249.119:28): proctitle="/usr/bin/libvirtd"
audit: type=1325 audit(1549994249.135:29): table=filter family=2 entries=4
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered listening state
virbr1: port 1(virbr1-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
kauditd_printk_skb: 80 callbacks suppressed
audit: type=1006 audit(1549994262.159:56): pid=1357 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
audit: type=1130 audit(1549994262.199:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1006 audit(1549994262.212:58): pid=1360 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
audit: type=1130 audit(1549994262.285:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1006 audit(1549994498.915:60): pid=1483 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
audit: type=1006 audit(1549994514.219:61): pid=11260 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
audit: type=1130 audit(1549994927.025:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1549994927.025:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
perf: interrupt took too long (2589 > 2500), lowering kernel.perf_event_max_sample_rate to 77100
perf: interrupt took too long (3541 > 3236), lowering kernel.perf_event_max_sample_rate to 56400
perf: interrupt took too long (4495 > 4426), lowering kernel.perf_event_max_sample_rate to 44400
perf: interrupt took too long (6020 > 5618), lowering kernel.perf_event_max_sample_rate to 33000
perf: interrupt took too long (7540 > 7525), lowering kernel.perf_event_max_sample_rate to 26400
perf: interrupt took too long (9563 > 9425), lowering kernel.perf_event_max_sample_rate to 20700
perf: interrupt took too long (12065 > 11953), lowering kernel.perf_event_max_sample_rate to 16500